As part of AOCC’s commitment to patient care we provide comprehensive, accessible diagnostic services. Our certified x-ray technologists enhance the diagnosis procedure and treatment plans of our physicians to make sure the patient receives the highest quality of care. An X-ray uses a very small amount of radiation to produce an image of the bones and tissues surrounding a joint.
No special preparation is necessary for an X-ray, but you should tell the technician if you could be pregnant. The risks of radiation exposure to the fetus are small, but they should be minimized.
You will need to remove all jewelry before the test. You may need to remove some clothing, depending on the part of the body being X-rayed. You’ll be given something to cover yourself.
The X-ray is performed in a radiology department. The X-ray machine will send a beam of ionizing radiation through an X-ray tube. This energy passes through the part of the body being X-rayed and is then absorbed on film or a digital camera to create a picture. Bones and other dense areas show up as lighter shades of gray, while areas that don’t absorb the radiation appear as dark gray.
The entire test takes no more than 10 to 15 minutes. You will feel no discomfort from the X-Ray test.
Linda is 1998 graduate of Bluefield State College as a Radiologic Technologist.
Rheumatology radiography and Bone Density (DXA)
Linda’s experience includes 4 years in urgent care and orthopedic radiology and more than13 years in rheumatology radiography. She is certified as a radiologic technologist through ARRT and is a member of the ASRT. She has more than 13 years of experience in bone density (DXA) and got her CBDT certification in bone densitometry in 2003 and has remained an active member of the ISCD since 2003. Linda has also been performing hand and foot ultrasounds since 2013.
Linda has been with AOCC since 2002.
Maura is a 2007 graduate of York Technical College as a Radiologic Technologist.
Maura has 2 years experience in urgent care, orthopedic and rheumatology radiography. She is certified as a radiologic technologist through ARRT and is a member of the ASRT. She also has 2 years experience in bone densitometry (DXA) and got her CBDT certification in 2015 and has remained an active member of the ISCD since 2015. She has been performing hand and foot ultrasounds since 2014.
Maura joined AOCC in 2014.
What is a Bone Density Scan (DXA)?
Bone density scanning, also called dual-energy x-ray absorptiometry (DXA) or bone densitometry, is an enhanced form of x-ray technology that is used to measure bone loss. DXA is today’s established standard for measuring bone mineral density (BMD).
DXA is most often performed on the lower spine and hips.
DXA is most often used to diagnose osteoporosis, a condition that often affects women after menopause but may also be found in men. Osteoporosis involves a gradual loss of calcium, as well as structural changes, causing the bones to become thinner, more fragile and more likely to break.
DXA is also effective in tracking the effects of treatment for osteoporosis and other conditions that cause bone loss.
The Hologic Discovery QDR system provides in one instrument a comprehensive clinical assessment of fracture risk, by addressing the two primary risk factors for osteoporotic fractures: low bone density and previous low trauma fractures. This advanced instrument provides a highly accurate and precise measure of the bone mineral density of the spine and hip (and in special circumstances, when needed, the forearm). In addition, Instant Vertebral Assessment (IVA) enables us to determine whether prior fractures of the spine have occurred. IVA can be performed rapidly and at a very low radiation exposure (much less than a regular x-ray of the lumbar and thoracic spines).
You should wear loose, comfortable clothing, avoiding garments that have zippers, belts or buttons made of metal. Objects such as keys or wallets that would be in the area being scanned should be removed.
Women should always inform their physician and x-ray technologist if there is any possibility that they are pregnant.
Many imaging tests are not performed during pregnancy so as not to expose the fetus to radiation.
**If an x-ray is necessary, precautions will be taken to minimize radiation exposure to the baby.